ANIMAL: the Custom-Built Denim Car from South Africa

Custom Denim Car in South Africa

Custom Denim Car in South Africa

One of the most ambitions items at Maker Faire Africa this year in Johannesburg, South Africa is Samuel Ngobeni’s “art car”. He’s a designer from Germinston, who has spent the last three years building his ANIMAL car, from the ground up, that means the frame and all. It’s a work in progress, though starting in 2011, it’s not quite done yet.

The first thing you’ll notice about it is that it’s completely covered in denim. When I asked him why, he said, “because it’s tough and can withstand a lot of things like the sun and rain, like the cowboys, that’s why I chose it.”

Denim car

Animal

Samuel and his car

The engine

At first glance, from afar, it looks a bit like a BMW shape, but when you get close you can tell just how much customization and work went into it. Then, when he opens the hood and shows you underneath, you can see that he actually hand-built the whole thing with steel piping and sheet metal, by hand.

It’s running a 3 liter, straight 6 cylinder engine, has suicide doors and leather seats.

Samuel’s next big idea is to find a v8 or v12 engine, slap that inside a custom built 6-wheel vehicle (4 in front, 2 in back) and then skin it all in croc-skin. His denim ANIMAL is already pretty slick, so his next car can only get better, and it sounds like it’ll be a lot more powerful and meaner too!

A quick sketch of Samuel's next car

A quick sketch of Samuel’s next car

How You Can Help

It’s difficult for designers like Samuel to get far on their own. He’s looking for someone who can take him to the next level. We’re setting up an email address for him now, but you can reach him on WhatsApp at 0822 110122 for now.

Maker Faire Africa comes to Jo’Burg

Maker Faire Africa was first held in Ghana in 2009, then Kenya 2010, Egypt 2011, Nigeria 2012 and now in South Africa 2014. It’s been an amazing thing to be a part of, and the best is to be there and see the local ingenuity, the practical inventions that are made by some of the smartest and scrappiest people in Africa.

Maker Faire Africa 2014 - Johannesburg

Makers from across Africa will join ZA Makers for 4-days of meet-ups, mash-ups, workshops, and seed-starting ideas for new collaborations in open innovation across the continent.

When: Sept 3-6, 2014
Where: WITS (University of the Witwatersrand), exact location TBD
Who: You + all the other Makers, just sign up

Pop-up Maker Space at MFA

Maker Faire Africa 2014 will bring together over 5,000 attendees, along with featured inventors, world-class makers, self-made entrepreneurs & workshop experts from South Africa, across the continent, and around the world, to manufacture real solutions for some of Africa’s most pressing challenges & opportunities in the areas of agriculture, health, education, power, and more. Whether your interest lies in technology, engineering, science, humanities, design or fabrication, you’ll find the best grouping of enthusiastic hardware innovators at MFA 2014.

At the heart of the Maker Faire Africa Community experience is our Pop-Up Maker Space – facilitated through a collaboration between local hackerspaces & volunteers and visiting world-class makers. Open the full length of the faire, it caters to all ages, skill levels, and interests. Visitors can organize their own impromptu maker projects using available tools & supplies, attend demonstrations such as 3D-Printing Indigenous Patterns, Light Up Your Gele, or Strawberry DNA Extraction, or participate in supervised workshops such as Learn to Solder, Solar Energy for Personal Power, Microelectronics 101 or AfriRobotics for Beginners.

MFA is structured to encourage visitors to actively make, not just observe. We integrate students and professionals alongside informal inventors in a way not happening elsewhere across Africa.

Some school girl makers in Nigeria 2012

Some school girl makers in Nigeria 2012

Handmade hydraulic toys at MFA 2012 in Nigeria

Handmade hydraulic toys at MFA 2012 in Nigeria

“Solutions for Africa’s economic growth must emanate from Africa to be wholly understood and integrated. Maker Faire Africa has the potential to be the birth- place of African invention fundamental to the continent’s development… these are Africa’s unsung heroes, as it is their understanding of what is needed, rather than what is simply cool, that translates into the most valuable economic asset on the continent today.”
Deo Onyango, GE Commercial Development Director for East Africa

Handmade Fashion Glasses - MFA Kenya 2010

Handmade Fashion Glasses – MFA Kenya 2010

Fundi Bots: Robotics Lab, School Clubs and Camps

Hardware hacking is what Solomon King does in Uganda, he already makes his own robots, now he’s taking that idea a little further. He’s taking it to kids, trying to get robotics into the hands of Ugandan youth through his Fundi Bots project. (Fundi is the word for technician).

Their plan comes in three parts: a lab, school robotics clubs and robotics camps.

That first item is important, a lab. A central place where the members of Fundi Bots can come in and find the relatively expensive tools, software and computers needed to make the robots and learn together. It gives a hub to their spokes of activity taking place in the schools throughout the year, a much needed “club house” for the community.

This idea of hardware hacking garages is something I’ve spoken about before:

This is an idea that effects everyone across Africa, a space like this is accessible and usable by young and experienced, rural and urban inventors and entrepreneurs. As much as we’d like to pretend that the ideas coming from outside of Africa will be picked up and used, the truth is that the ideas need to come from Africans for themselves and their community. An open Hacking Garage platform is where real hardware innovation for Africa will come from.

Interestingly, the founder of Fundi Bots is from the software side, he’s the CEO of his own web services company Node Six, and a well-respected member of that community. I find it interesting that a lot of times, the people who get into the robotics side come from a software background.

What I find even more encouraging is that Solomon and his colleagues in this enterprise, Betty Kituyi and Gasper Obua, are doing this on their own. They aren’t waiting for investment, grants or some other form of support to get started. Instead, they’re creating robots, making inroads into schools and figuring it out as they go. Too many times people sit on a good idea and make excuses for why they’re not doing something about it. That’s not the case here.

Finally, if you’re interested in Fundi Bots, I do know that they could use some support. It might be getting them into schools, or connections with robotic parts manufacturers or resellers.

Other Hardware Hacking News

Makeshift Magazine

Put together by Steve Daniels, Myles Estey and Niti Bhan, Makeshift is a new quarterly magazine and journal about maker culture from far parts of the world. The first publication will be themed “Re-culture: Reuse, repair, and recycle at the grassroots,” featuring stories such as everyday product hacks in Kenya, industrial fabric recycling in India, improvised tools in Myanmar, recycled art in Colombia, and adaptive reuse of industrial sites in the United States. Support their Kickstarter campaign.

Maker Faire Africa 2011: Egypt

Also happening later this year is Maker Faire Africa, in Egypt. It’s a mashpit of hardware hackers, just like Solomon, who are creating new inventions and making new products. This is the third Maker Faire Africa, following Ghana and Kenya, and will bring a unique northern Africa flavor to the event.

Maker Faire Africa 2010: Nairobi

We’re just a month away from one of my favorite events of the year: Maker Faire Africa! It’s where we bring inventors, innovators and ingenious designers and artists into one place. Last year we did it in Ghana, this year it’s in Kenya on August the 27th to 28th. Submit your project here!

“The aim of a Maker Faire-like event is to create a space on the continent where Afrigadget-type innovations, inventions and initiatives can be sought, identified, brought to life, supported, amplified and propagated.”

The aim is to identify, spur and support local innovation. At the same time, Maker Faire Africa would seek to imbue creative types in science and technology with an appreciation of fabrication and by default manufacturing. The long-term interest here is to cultivate an endogenous manufacturing base that supplies innovative products in response to market needs.

Projects, Sponsors and Links

‘Match a Maker’ was started last year, and it was such a big success that we’re doing it again this year. It’s done in order to link people up who could help each other with technical advice, contacts and business advice.

There will be a business corner for entrepreneurs to get help from local experts, a time devoted to kids experimenting with technology, and talks by local and international experts on everything from manufacturing to scaling your business.

Workshops

  • ‘Think Solar’ : Solar technology for young people
  • ‘Crafting peace’ : Hand crafts for children
  • ‘Hack your mobile’ all ages

A BIG thanks to Freedom to Create, Butterflyworks and ASME for sponsoring this year’s event!

Keep up to date on the Maker Faire Africa:
Blog
Twitter: @makerfairafrica
Flickr Group

Talking community with Ghanian devs

I was supposed to put on a talk to day at Maker Faire Africa (high-tech side) about mapping on mobiles and web, but when the time came it just didn’t feel like the right thing to do. Instead, with the mix of people at the room I launched into a discussion about what I saw as a lack of communication and cohesion with in the Ghanaian programming community.

Having a Ghana programmer talk

Everyone agreed that there is a lack of general communication and collaboration in this space, though there are a few user groups for things like Linux and a new one for Java. It’s too bad really, because I don’t think there is less talent in Ghana, but that this lack of cohesion of the tech community means that it’s hard for people to “announce” new things and/or get help for areas that they need to get assistance in. The reason I see this is due to the great activity that I see on the Kenyan Skunkworks email list – the contrast between Accra and Nairobi in this is quite stark.

At the end of the discussion, everyone in the room decided to try for the 2nd Tuesday of every month at 7pm. Daisy Baffoe is the one with the list and is going to get in touch with everyone with a location. Hopefully we’ll see the beginnings of a general programmer community in Ghana!

A picture with the Mozilla guys

Maker Faire Africa in 2 Weeks

I’ll be in Ghana next week to help with the final preparations for Maker Faire Africa, taking place August 14-16 in Accra, with the rest of the organizing team. It’s looking to be quite the event with many Ghanian Makers, as well as some from Kenya, Liberia and Malawi. The FabLab teams from Nigeria and Kenya will both be showing what they’ve been building, as well as some of the teams from the IDDS event.

A Small Taste…

Dominic Wanjihia from Kenya will be coming to show his evapocooler invention for cooling camels milk in Somalia, along with an number of his other inventions.

The FabLab team from the University of Nigeria on their way. Look for a bunch of neat stuff, including: a mobile device battery charger using cycle power, a simple mobile robot, a Wi-fi phone network, and a universal remote control for switching on/off your lights.

Planish, a company that makes cool, funky looking furniture from water bottles will be showing their wares.
Water bottle furniture from Ghana by Planish

Nana Kofi Acquah is an amazing Ghanaian photographer with images that capture the spirit of Ghana. His breathtaking pictures have been used by the likes of FIFA, Nike and Nestle in campaigns around the world. You can find his professional site at NKAphoto.com »
Picture by Nana Kofi Acquah in Ghana

Pat Delaney, of Multimachine fame, is coming. This is an, “all-purpose open source machine tool that can be built inexpensively by a semi-skilled mechanic with common hand tools, from discarded car and truck parts, using only commonly available hand tools and no electricity.” Though he can’t bring the full machine, he is bringing all the knowledge cased in DVDs for anyone to build their own out of locally available parts.

Most of my blogging about Maker Faire Africa will happen on AfriGadget, but there will be a lot of content up on the MFA blog as well.

Sponsors

An event like this just wouldn’t be possible without the help of others. We’re fortunate to have some great sponsors on board, including: IDDS (happening right now in Ghana, read their blog), American Society of Mechanical Engineers (ASME), Butterfly Works, Inveneo, Moving Windmills, Mozilla, AndSpace Labs and many individual donations totaling up to $2400 (thanks!). Lastly, a special thanks to Dale, and the rest of the O’Reilly team, for letting us use the “Maker Faire” moniker for this event.

Maker Faire: Africa

Maker Faire Africa (MFA) is a new event celebrating the innovation, ingenuity and invention within Africa – happening August 13-15 of this year in Accra, Ghana.

Maker Faire Africa in Ghana

We came at this event from a specific angle – we mixed the types of individuals who show up on AfriGadget and Timbuktu Chronicles, and the ethos of the greater MAKE community, all with the blessings of the good folks at Maker Faire. The dates were chosen to coincide with Amy Smith’s and MIT’s International Development and Design Summit (IDDS), which will run for 3 weeks before MFA, also in Ghana.

As Emeka puts it:

The aim of a Maker Faire-like event is to create a space on the continent where Afrigadget-type innovations, inventions and initiatives can be sought, identified, brought to life, supported, amplified, propagated, etc. Maker Faire Africa asks the question, “What happens when you put the drivers of ingenious concepts from Mali with those from Ghana and Kenya, and add resources to the mix?”

How You can Support MFA

get a Maker Faire Africa badge!First off, help spread the word! Let people know where and when it will be. Share the link to the site, grab a badge, blog it.

Second, help us find sponsors. If you know an organization or individual who would like to support this amazing event, put us in touch with them. It could be monetary, or it could be donating some cool gadgets, gear, tools or devices for people to hack on while there. (example idea: we’d love to get some LEGO Mindstorm kits for the local high schools).

Third, come. If you have the time and ability, we’d love to have you, your ideas and your gadgets at MFA.

The Team

In my role as founder of AfriGadget, I’m part of the organizing team to put together Maker Faire Africa, joined by my an excellent group of people including:

Want to get involved yourself? Get in touch!